RODE Wireless ME TX Transmitter for Wireless Series IV

wireless transmitter to complement Wireless ME, compatible with all Wireless Series IV, built-in microphone, Lavalier GO microphone connection, easy to use and set up, USB-C, two Furry wind protectors

TheWireless ME TX is a compact wireless transmitter that enables professional audio transmission and recording for your videos. Preparation and use is very easy, the operation is intuitive. GainAssist automatically takes care of optimal input sensitivity. You can replace the integrated microphone with the Lavalier GO lapel microphone. It is ideal for extending the RDE Series IV wireless system.

• transmitter for Wireless ME Series
• compatible with Wireless Series IV
• built-in microphone
• microphone input for Lavalier
• battery life up to 7 hours
• USB-C setup and charging

The Wireless ME TX is a compact wireless transmitter that enables professional audio transmission and recording for your videos. Preparation and use is very easy, the controls are intuitive. It is ideal for extending the RDE Series IV wireless system. A condenser microphone with spherical characteristic is built into the transmitter body; it serves to capture the spoken word or any audio signal. The Wireless ME TX also features a TRS 3.5mm (small jack) input for the Lavalier GO lapel microphone. However, you can also connect any RDE video microphones that have a TRS 3.5 mm termination to the input.

GainAssist - intelligent sensitivity adjustment
Thanks to the intelligent GainAssist technology, you dont have to worry about adjusting the input sensitivity. The Wireless ME TX detects the signal and sets the optimal input sensitivity itself. So you can simply clip it to the speakers clothing, switch it on and start recording. You get a crystal clear signal without noise and distortion sound in seconds.

USB-C - connect to your computer or smart device
Use the USB-C connection (USB 2.0) to connect to your computer. When connected to a computer or smart device, the charging process automatically starts. Using the RDE Central app, which can be downloaded for free from the manufacturers website, you can conveniently set all parameters of the Wireless ME TX transmitter.

Compatibility - what does it do?
Wiresless ME TX is compatible with Wireless Series IV receivers: Wireless ME (RX), Wireless GO II (RX). It can be used to augment all single channel sets with a dual channel receiver, such as Wireless ME and Wireless GO II Single. It is an ideal partner for all podcast consoles that already have a wireless receiver implemented. These include the RDECaster Pro II, RDECaster Duo and Streamer X.

Note: Wireless ME TX requires a RDE Series IV RX (receiver) to operate. It is not fully functional by itself.

Furry windscreen - shoot even in a blizzard
To enable you to use the Wireless ME TX outdoors even in windy weather, two wind screens - Furry Windscreen - with a locking mechanism are included. Simply place it on the integrated microphone, turn it and you can record even in windy autumn weather without disturbing noises.

• 1x Wireless ME TX (transmitter)
• 2x Windscreen Furry
• 1x SC22 cable, length 30 cm (USB-C to USB-C cable)

• built-in microphone: condenser (electret)
• directional characteristic: omnidirectional (spherical)
• microphone frequency range: 50 Hz - 20 kHz
• transmission frequency range: 50 Hz - 20 kHz (3 dB)
• maximum input level (3.5 mm): 96.8 dB (Gain = 0)
• microphone preamp sensitivity: 118.0 dB SPL at Gain = 0
• equivalent noise (dBA)
  • Gain = 0: 17.7 dBA
  • Gain = 100: 19.9 dBA
• analog input (Lavalier)
  • TRS 3.5 mm
  • impedance: 2.2 k
• connection to computer/smart device: USB-C (USB 2.0)
• charging: 5 V / 500 mA (requires USB-C slot with power supply)
• power supply: built-in rechargeable Li-ion battery
• working time (on full charge): 7 hours
• range: 100 m (line-of-sight)
• resolution: 24-bit / 48 kHz
• operating systems
  • macOS 10.11 and higher
  • Windows 7 and higher
  • iOS
  • Android
  • detailed and up-to-date information on the manufacturers website

mechanical features

• dimensions (H x W x D): 4.5 x 4.4 x 1.9 cm (body thickness without clip)
• weight: 0.03 kg (30 g)