Saramonic Vmic4 Condenser Microphone for Cameras and Camcorders

The Saramonic Vmic4 condenser microphone for cameras and camcorders is the ideal choice for people who record conversations - reporters, vloggers and creatives posting on Instagram or TikTok. It features 2 independent capsules. With these, you can record not only the sound from the front, but also the one coming into the camera from the back. Depending on your needs, you can switch on both built-in microphones or limit yourself to just the front one. The unit also features a headphone jack and a mini jack port to which you can connect an additional audio source. The microphone is powered by a single AAA battery. The kit does not lack a deadcat wind shield and the cables needed to connect to the mini jack on your camera, camcorder or smartphone. Main product features capacitive microphone equipped with two capsules - front and rear the front microphone offers super-cardioid sound characteristics the rear microphone offers a cardioid sound characteristic switch to activate both microphones or record with the front one only mini jack socket allowing you to connect an additional sound source (e.g. a tie microphone) the external microphone socket is always active, regardless of the mode of the built-in capsules ideal for use with digital SLR cameras, mirrorless cameras, smartphones and video cameras equipped with a mini jack allows reduction of unwanted background noise high-pass filter to cut frequencies below 200 Hz offers 3-stage "Gain Control" (-10 dB, 0 dB, + 10 dB) powered by 1 AAA battery or rechargeable battery mini jack headphone socket for latency-free audio monitoring fast and convenient installation with cold shoe additional cold shoe socket on microphone housing included deadcat wind shield and 2 cables all enclosed in a robust padded zipped case Interviews, vlogs and reports The Saramonic Vmic4 is a unique microphone that will be ideal for reporters, vloggers and interview recorders. The use of 2 independent capsules will allow you to record high quality audio that will be collected from the front and back of the unit. Depending on your needs, you can turn on both built-in microphones or limit yourself to just the front one. If you're commenting on what's going on around you on your vlogs or recording interviews, the Saramonic Vmic4 will be the perfect choice. Average sound quality The sound recorded with the microphone built into your camera or camcorder can often deprive your video productions of a "wow" effect. Choose the Saramonic Vmic4 microphone to make sure you and your interlocutors can be heard loud and clear! You can conveniently connect it to devices equipped with a 3.5 mm mini jack socket, gaining broadcast quality sound in your video productions! Thanks to the super-cardioid sound characteristic of the front capsule, you will effectively reduce unwanted background sounds, capturing primarily what you hear in the foreground. External audio source The Saramonic Vmic4 will allow you to conveniently expand your audio workflow. The device is equipped with a 3.5 mm TRS mini jack, to which you can easily connect an additional microphone (e.g. a tie microphone). This will give you another sound source from which the signal will be transmitted directly to your camera, camcorder or your smartphone. This will make recording conversations involving several people even more convenient. Mounting an additional device The Saramonic Vmic4 condenser microphone features a cold shoe for convenient mounting in the flash mount that crowns almost every camera. However, you don't have to worry about losing the installation point that allows you to connect an additional accessory to the unit. There is a moulded rail on top of the microphone where you can easily mount the flash. Real-time listening Recording audio often requires the quality control that headphones provide. On the Saramonic Vmic4 condenser microphone housing, there is no shortage of a 3.5mm mini jack socket to which you can easily connect them. Monitoring takes place in real time, so there are no delays or unpleasant echoes. Multitude of functions Ergonomic switches located on the side of the housing allow us to quickly and conveniently activate additional microphone functions to improve the quality of our recordings. If necessary, we can use a higher (+10 dB) or lower (-10 dB) input level, as well as activate a high-pass filter (200 Hz), which effectively suppresses unwanted frequencies that interfere with sound recording. Universal power supply When working with the Saramonic Vmic4 condenser microphone for cameras and camcorders, you don't have to worry about access to a power socket or charge level. The device is powered by a single AAA battery. You can find one at almost any kiosk, so when you run out of power, you can easily replace a discharged cell with a new one. A AAA battery or battery pack MUST be purchased separately. Specification model: Saramonic Vmic4 type: capacitive Characteristics: front microphone: super-cardioid rear microphone: cardioid bandwidth: 75 Hz - 18 kHz Sensitivity: front microphone: -35 ± 3 dB (0 dB = 1V/Pa, at 1kHZ) rear microphone: -45 ± 3 dB (0dB = 1V/Pa, at 1kHZ) signal-to-noise ratio: 75 dB Input: 3.5mm TRS (mini jack) Outputs: headphone, 3.5 mm TRS (mini Jack) 3.5 mm TRS (mini Jack) dimensions: 127.5 x 40 x 32 mm weight: 94 g Kit contents Saramonic Vmic4 condenser microphone for cameras and camcorders stiffened zippered carrying case deadcat cover 3.5 mm TRRS / 3.5 mm TRS cable (for cameras and camcorders)