Caligri Airtube Switch 60 Softbox

Caligri Airtube Switch 60 Softbox

The diffuser fabric is not firmly sewn, but is held in place with a Velcro connection. It is therefore replaceable. The scope of delivery includes 3 covers. Full, Half & Quarter. This allows you to adjust the degree of softness more precisely on set. The material underneath is completely transparent. If you need maximum brightness, you could also leave out the diffuser.
Otherwise, the principle is exactly the same as with the Classic series. The light is fixed in place with Velcro strips. You can inflate it with a standard air pump (like an air mattress). The diameter increases to 19 cm. You can limit the light cone using curtains. Important operating elements of the light remain freely accessible.
The Airtube Switch 60 is a softbox for tube lights with a length of 60 cm.

Suitable for the following tube lights

• All LED tubes with a max. length of 60 cm, e.g:
• Amaran PT2c
• Aputure INFINIBAR PB6
• Godox Knowled TP2R
• Nanlite PavoTube II 15X
• Quasar Science 2 Rainbow 2
• Quasar Science Double Rainbow Linear LED Light - 2 ft
• Soonwell Sensei Tube 25 W ST25-EU-K
• Vibesta Peragos Tube 60C PIXEL

Dimensions when assembled

• Total length 70cm
• translucent part 60cm
• Diameter 19cm

Features

• Interchangeable diffuser mats
• Light is fixed with Velcro straps
• Softbox can be inflated with a commercially available air pump from a specialist camping shop (or by mouth if necessary), max. air pressure 0.83 bar
• Opening diameter of the valve: 1.75cm / 0.68
• Light cone can be limited using curtains
• Rear light can be covered by an apron
• Softbox, curtains and skirt are designed so that the lights controls remain easily accessible
• Made in Germany from proven, high-quality materials (Magic Cloth® and Ultrabounce® from TRP worldwide)

Scope of delivery

• Airtube Switch 60
• Diffuser mats, 1x full, half and quarter each
• Curtains, consisting of two parts (for lateral shielding)
• Skirt, consisting of two parts (to cover the rear light)
• Replacement Velcro strips to fix the tube
• gym bag
• Mechanical hand air pump (free of charge)

Safety instructions

• If the light is completely covered with curtains and aprons, the ambient temperature is very high and / or the light is running at full power, you should keep an eye on the temperature. It may be necessary to allow the luminaire to cool down slightly or to ensure adequate ventilation.
• The AIRTUBE can withstand a temperature of up to 85°C / 185°F
• Maximum air pressure: 12 PSI / 0.83 bar. Especially when inflating with a compressor, you should keep an eye on the pressure to ensure that the seams remain intact.
• To protect the Airtube from kinking or other damage, you should roll it up carefully when storing or transporting it. We recommend storing it in the box.

Care tips

• the white, translucent fabric is best cleaned with warm water and, if necessary, a gentle soap
• the black cover is best cleaned with warm water and a common household cleaner