Tascam DR-10CS Recorder for Lavalier Microphones

Tascam DR-10CS Recorder for Lavalier Microphones

The DR-10C-series recorders connect to your lavaliere microphone to create a compact recording system that fits on a belt pack. The DR-10CS is designed for use with Sennheiser microphones. An option kit is available for Sony/Ramsa (AK-DR10CR).

The DR-10C recorders have both inputs and outputs, so they can either be used standalone or with a wireless transmitter. When used with a transmitter, the unit acts as a backup to protect against wireless dropouts during recording. For lectures or worship services, the DR-10C can record the entire program before it gets to the front of house system. And for events like weddings and reality TV production, the DR-10C is a compact recording system for body mics.

The lightweight DR-10CS runs for hours on a single AAA battery. It records to standard microSD media. Recording features include auto-gain and a low-cut filter for simple setup. Its Dual Recording feature records a safety track of your audio at a lower level, so in case of distortion you have a non-clipped backup.

The DR-10CS recorder can be connected between the microphone and a transmitter of a wireless system from a supported manufacturer. Connect the mic to the recorder and use the included cable to connect it to the transmitter. This setup is perfect for use as a backup recorder – assuring the capture of audio should the signal sent through the wireless system be interrupted.

The lineup includes models that can be used with several manufacturers. Standard models support Sennheiser and Shure wireless systems. In addition, Sony and RAMSA systems can also be used by installing optional replacement panels with the required connectors.

The DR-10C is compact - fitting in the palm of the hand and lightweight at 51 grams. Moreover, it is designed to be carried like a single unit with the transmitter. Included is a silicon band that can be used to attach it to the transmitter, and a durable belt clip – allowing several options for use depending on the situation.

The DR-10C can be utilized in recording situations when performers or speakers might move outside the wireless system reception area. When not used with a wireless system, it is perfect as a stand-alone, compact wearable recorder when paired with a lavalier microphone.

Many times, there is only one chance to get the desired audio. This unit has functions to prevent issues related to recording level settings – including a dual recording function that allows you to set the recording level as high as possible while simultaneously recording a backup track at a lower level. In addition, this unit has an automatic gain control function that adjusts the input level to match the input volume. There is also a limiter function.

• Sliding record switch and hold function to prevent misoperation during recording
• Multiple functions, including dual-recording for simultaneously creating a safety track at a lower level
• Before the battery charge runs out, automatic file closing prevents the loss of already recorded data
• Built-in clock function and support for BWF files (time information stored in metadata)
• Playback function for checking recordings, and the headphone output enables input monitoring

The infrared transmission function makes it possible to easily transmit settings from one DR-10C to another. When using multiple units, you can copy the settings of one unit that has already been set to other units one after another.

Features:
• Micro linear PCM recorder for lavalier microphones
• Can be connected between a lavalier microphone and a wireless transmitter to provide a backup recording
• Mono BWF recording at 48 kHz sample rate and 24-bit resolution
• Records to microSD/microSDHC card (up to 32 GB)
• Dual recording function allows two files to be recorded simultaneously at different levels to provide a safety track in case of distortion
• Hold function prevents accidentally switching off the recorder
• Switchable limiter to prevent clipping
• Switchable low-cut filter conveniently reduces low-frequency noise
• Auto gain control
• Time Track increment function writes new track after a preset amount of time (switchable on/off)
• Playback function for checking recordings via headphones
• Headphones output
• Built-in clock for storing time information with recordings
• OLED display with great visibility
• Micro USB-B connector for easy data transfer with a computer
• Power supply through one AAA battery/rechargeable or USB connection
• More than eight hours recording with a single AAA battery
• Settings can be created in a text file on a computer and transferred to the DR-10C via USB
• Infrared data communication allows setting information to be transferred to other DR-10C recorders
• Firmware update possible using the microSD card
• DR-10CS for Sennheiser mics, option pack available for Sony/Ramsa (AK-DR10CR)

General

Recording media

microSD card (64 MB – 2 GB)
microSDHC card (4–32 GB)

Recording and playback formats

Mono WAV files (BWF format), 48 kHz, 24 bit

Inputs and outputs

Analogue input (microphone)

DR-10CS (for Sennheiser): 3.5-mm mini TRS jack (with screw lock)
DR-10CH (for Shure): Mini XLR 4-pin male

Maximum input level

–12 dBV

Minimum input level

–53 dBV

Mic input gain

10 dB to 35 dB (according to MODEL SELECT setting)

Input impedance

33 kΩ or higher

Analogue output (passed to the transmitter)

DR-10CS (for Sennheiser): 3.5-mm mini TRS jack (with screw lock)
DR-10CH (for Shure): Mini XLR 4-pin male

Analogue output (Headphones jack)

3.5-mm mini stereo jack (dual mono audio output)

Audio performance, input to phones output

Frequency response

20 Hz – 22 kHz, +1/-3 dB

Distortion

0.05 % (1 kHz sine wave, maximum input level)

S/N ratio

88 dB or higher (PHONES level max., MIC GAIN set to LO)

Requirements for connected computers

Supported operating systems

Windows 7, Windows 8 (including 8.1); OS X Mavericks (10.9); OS X Mountain Lion (10.8)

Power supply and other specifications

Power supply

1 AAA battery (alkaline, NiMH or lithium)
USB bus power from a computer

Power consumption

0.45 W (maximum)

Current consumption （USB bus power)

0.25A (maximum)

Date and time data retention

Secondary lithium battery (built-in)

Dimensions (W × H × D)

52 × 56 × 25 mm (excluding protrusions)

Weight

63 g (with battery); 51 g (without battery)

Permissible operating temperature range

0-40 °C

Battery operation time
Conditions: WAV recording at 48 kHz/24 bit, continuous operation, JEITA recording times, in hours: minutes
Alkaline battery (Evolta)

10:00

Microphone and transmitter connected, headphones not connected, mic bias off, limiter off, dual recording off

9:30

Only microphone connected, headphones not connected, mic bias on, limiter off, dual recording off

NiMH battery (Eneloop)

8:00

Microphone and transmitter connected, headphones not connected, mic bias off, limiter off, dual recording off

7:30

Only microphone connected, headphones not connected, mic bias on, limiter off, dual recording off

Lithium battery (Energizer Ultimate Lithium)

15:30

Microphone and transmitter connected, headphones not connected, mic bias off, limiter off, dual recording off

14:30

Only microphone connected, headphones not connected, mic bias on, limiter off, dual recording off