RGBlink EcoSystem PTZ 10x & Stream (RGECO-05)

RGBlink EcoSystem PTZ 10x & Stream (RGECO-05)
PTZ-Camera, 5,5“ Monitor, Switcher, Recorder, Streamer and NDI|HX-Encoder/Decoder in an All-In-One Solution!

Set consisting of RGBlink TAO 1Pro monitor/recorder and USB PTZ camera 10x optical zoom.

The RGBlink EcoSystem PTZ 10x & Stream is a highly mobile bundle with the RGBlink USB PTZ Camera 10x Optical Zoom and the TAO 1Pro monitor. The two devices are simply connected with the supplied USB cable, and power is supplied either via the TAO 1 Pros mains cable or via NPF-compatible batteries on the TAO. The PTZ camera can be controlled via the supplied remote control or via the TAOs touchscreen. The numerous analysis functions on the 5.5 monitor allow accurate image control. Two additional HDMI sources and a UVC source can be connected to the TAO to switch between video signals. The TAOs programme stream can either be output via HDMI, recorded to an external USB storage device, streamed directly to video platforms or even distributed as an NDI|HX stream in the network.

In conjunction with a mobile 5G router with LAN connection, EcoSystem PTZ 10x & Stream enables mobile recording and streaming to YouTube, Facebook & Co without a PC and external power supply when using NPF batteries!

In the Box
1x RGBLink TAO 1Pro Monitor/Recorder
1x USB-C power supply unit with cable
1x threaded screw for mounting

1x RGBLink RGB10X-USB-BK PTZ Camera
1x 230V to 12V power supply with 2.5 metre cable
1x IR remote control (2x AAA batteries required)
1x USB 2.0 cable 2 metres
1x RS-232 cable 2 metres
1x RS-485 connector
1x Manual (English)

RGBlink USB PTZ Camera 10x Optical Zoom (RGB10X-USB-BK)

The RBGlink USB PTZ Camera 10x offers excellent functionality and, with its 1/2.9 inch sensor, outstanding image performance in an extremely compact design. The quiet control motors allow the camera to be used in a variety of ways at live events, online meetings or in a school environment. The matt black finish has a very elegant look.

• 70° wide angle lens
• Low noise and high SNR
• Pan and tilt control
• Low-power sleep functionality
• Auto-focus technology
• Up to 255 presets
• 1/4 tripod thread on the underside

The video stream is output with a maximum resolution of 1920*1080 at 30 frames via the USB 2.0 interface. With the 10 x optical zoom, it is suitable for recording at greater distances without loss of quality. The supplied remote control allows stepless zooming, convenient control in all directions and saving and recalling of different viewing angles.

When connected to a USB 2.0 interface, the use of the supplied power supply is not necessary. The camera is automatically recognised as a video source via the UVC protocol and can be directly integrated into Microsoft Teams, Zoom, OSB-Studio or other applications.

The camera is compatible with all RGBlink PTZ mounts and overhead mounting is also possible. The 1/4 tripod thread on the bottom also allows mounting on a tripod.

RGBlink TAO 1Pro Monitor/Recorder

The RGBLink TAO 1Pro is a universal talent - preview monitor, switcher, recorder, streamer and NDI|HX encoder/decoder combined in a very compact design. Intuitively controllable via touchscreen with German-language menu guidance - streaming from anywhere to everywhere at anytime!

• 5.5 touchscreen operation
• Switcher for seamless transitions
• NDI|HX encoder/decoder
• Multistream for up to 4 live streaming platforms simultaneously
• Network HD streaming (optional in portrait mode for smartphone optimisation)
• 2x UVC inputs, 2x HDMI 1.3 inputs, 1x HDMI 2.0 output
• Recording via USB 2.0 port for up to 2TB
• OSD menu in German/English

Preview monitor
With its 5.5 full HD display and 450 nit brightness, the TAO 1Pro has the most important functions for image evaluation. Brightness waveform, RGB waveform, vectorscope and histogram - In addition, all analyses run transparently over the live video and in 3 selectable sizes.

Switcher
Two Full-HD HDMI inputs enable the input of camera or notebook signals. In addition, the two USB 3.0 inputs ensure the operation of webcam or UVC-compatible cameras. - Switching between the four video inputs is possible via touchscreen. In addition, the programme stream is played back live at the HDMI output. In addition, the TAO 1Pro can display six different stereo levels: Four for the video inputs, and one each for the 3.5mm microphone and jack outputs.

Recording
With the TAO 1Pro it is possible to record the programme stream on external USB media with up to 2 TB capacity. The codec used is H.264 with a maximum resolution of 1920x1080 at 30 fps.

Streaming
The TAO1 Pro offers a unique streaming experience. Stream simultaneously on up to 4 platforms of your choice - without a PC. All you need is a network cable and an Internet router or a mobile 5G router with a LAN socket. All parameters are already stored for the most important streaming platforms. The individual streaming keys can simply be transferred to the TAO 1Pro via USB stick, so that events can then also be planned in advance. In addition, individual RTMP streams can also be generated. Optionally, the screen and video stream can also be output in portrait format for optimal display on smartphones.

NDI|HX encoder/decoder
The NDI encoder makes the programme stream available as a latency-free NDI signal in the network. Currently NDI 5.0 is supported, the output is an NDI|HX stream. In addition, the TAO 1Pro can decode NDI|HX streams from other NDI devices such as PTZ cameras, converters, etc. and output them to a large display via the HDMI output, for example. The TAO 1Pro is thus a complete HDMI to NDI|HX and NDI|HX to HDMI converter.

Other functions
To create adapted streams for mobile devices as well, the display of the TAO1 Pro can optionally be shown in portrait format. Power is supplied via the included USB adapter cable, but can also be supplied via an NPF-compatible or Panasonic D54-compatible battery. A ventilation system with automatic speed control is built in, which can also be adjusted manually in four steps. Mounting on cameras is made possible by the included ¼ tripod screw.

Firmware updates
RGBlink provides the latest firmware at the following link. Updates can be easily uploaded via USB stick!
https://www.rgblink.com/download.aspx