Jauns
Produkta veids | Koferis |
Kameras veids | Polaroid |
B&W OUTDOOR CASE TYPE 1000
Hard, protective case that fits a digital camera with lens.
Comes with pre cut foam inserts in the lid and main compartment.
The Nosacz 2 waste combustion detector is a completely Polish design and product. It has been designed to optimally combine light weight with functionality. It weighs only 650 g and is ready for use just 90 seconds after start-up. Thanks to the convenient-to-use Ground Station, as well as the extensive FlyConnect system, it provides real-time access to collected data from almost anywhere. Integrity with DJI Matrice platforms guarantees flight safety and reliability.
The device is designed to detect sources of air pollution. Its main task is to detect potential sites of illegal burning among many identical-looking hearths or fumes. In the same way that a police 'candle' breathalyser can catch intoxicated drivers and then check them individually, the Nosacz 2 detects those contributing to air pollution, after which the Municipal Police go to them for a detailed check.
Carrier 2 continuously collects samples from the emitted smoke, which are then transferred to an analyser. Information on the substances detected, together with the coordinates, exact date and time, reaches you after only a few seconds of examination. The device also allows smog maps to be created. Thanks to the use of the GSM network and the dual recording system on MicroSD cards and the FlyConnect system, your data is completely secure and you have easy and fast access to it in any situation.
The included Ground Station allows you to conveniently view the collected information in real time on the Nosacz 2 System. That's not all! It also allows you to set individual alarm thresholds, track data graphs and save the results of selected measurements. What's more, an additional sound and vibration system alerts you to possible dangers even when you cannot look at the screen. Special adapters allow the Ground Station to be mounted on the control unit, which, combined with a range of up to 500 m and an operating time of up to 8 hours, makes using the device even more convenient and efficient.
The special FlyConnect system gives you access to information from almost anywhere on earth. You don't have to be limited to using the Ground Station only. The Carrier 2 uses a fully secure, encrypted internet connection to transmit data to the cloud instantly. All you need to read them is a smartphone or computer with internet access - whether you're working in the office or running an operation in the field, you can have all the information at your fingertips at all times. This enables the coordination of multiple units and smooth communication between officials, municipal guards or service technicians. Due to the full scalability of the system, there is no limit to its users - so you can successfully use FlyConnect to efficiently manage different types of actions.
The detector has been equipped with a special quick coupler, which, thanks to its compatibility with the DJI SkyPort standard, allows the device to be integrated instantly into the DJI Matrice series of drones. Dedicated adapters also make this possible. This means you can enjoy guaranteed safe flight and efficient survey missions. The Carrier 2 also does not put too much strain on the carrier platform. The flight time of the DJI Matrice 200 series drone with the detector attached is approximately 27 minutes, and for the Matrice 600 approximately 32 minutes. The detector is also compatible with the DJI Matrice 300 RTK - this advanced platform is equipped, among other things, with special directional sensors to effectively avoid obstacles, even during night operations. By combining the incredible capabilities of both devices, you will get optimal results in almost any situation.
By integrating the Nose 2 with a Matrice series drone, you can also mount an additional camera. However, this reduces the flight time by around 3-4 minutes. In the case of the Matrice 600/600Pro or the Matrice 200 series platform (using an adapter for top-mounted devices), it is also possible to attach an additional camera sensor to the platform at the same time (e.g. X4S, X5S, Z30, XT/XT2). Mounting a camera to a Matrice 600 requires another adapter. The use of the DJI Matrice 200 series platform is considered to be the most recommended and suggested solution due to its ease and speed of mounting, built-in FPV camera, greater water resistance and lower costs associated with later operation.
The Carrier 2 is also distinguished by its advanced sensor chamber. With it, you can install up to 6 additional chemical sensors. The modular design allows them to be freely configured at almost any time. So you gain, among other things, the possibility of installing detectors for hydrogen chloride, ammonia, hydrogen cyanide, hydrogen sulphide or nitrogen oxides. All this means that your control can be even more precise!
Available sensors
Measurement | Measurement range | Resolution | Accurancy |
Basic sensors (included): | - | - | - |
Temperature | -40 - +100 °C | 0.1 °C | +/- 1*C |
Humidity | 0-100% RH | 0.1% RH | +/- 4.5%RH |
Particulate matter (PM 1,2.5,10) | 0-4000 ppm | 1 ppm | +/- 10% |
Volatile organic compounds | 0-100 ppm | 0.1 ppm | +/- 15% |
Formaldehyde | 0.1-5 ppm | 0.01 ppm | +/- 15% |
Optional sensors (available at extra charge): | - | - | - |
Hydrogen chloride (HCl) | 0-100 ppm | 0.1 ppm | +/- 10% |
Hydrogen cyanide (HCN) | 0-100 ppm | 0.1 ppm | +/- 10% |
Nitrogen oxides (NOx) | 0-20 ppm | 0.1 ppm | +/- 10% |
Hydrogen sulphide (H2S) | 0-100 ppm | 0.1 ppm | +/- 10% |
Ammonia (NH3) | 0-500 ppm | 0.1 ppm | +/- 15% |
Additional optional sensors are tailored to individual requirements and needs.
Dimensions | 110 x 70 x 18 mm (without antenna) |
Weight | 150 g |
Battery | Li-Pol 3.7V 1800 mAh |
Operating time | 8h |
Telemetry | Radio, minimum 500 m LOS |
Display | 3.5” touchscreen |
Connectors | USB-C, MicroSD, Mounting adapter for DJI cameras and CrystalSky monitor |
Other | Receive information from any sensor on any number of Ground Stations |
Visualisation of measurements on graphs in the form of alarm conditions
Dimensions | 180 x 95 x 70 mm (without antenna and measurement probe) |
---|---|
Weight | 620-680 g (depending on configuration) |
Battery | Li-Ion 8.4V 6600 mAh |
Operating time | on stand-alone power (8 h) / on board power (same as platform) |
External power supply | 9-15V |
Standby time | 45-90 seconds (depending on configuration) |
Radio | telemetry, minimum 500m LOS |
Pump capacity | 12-15 l/min |
Connectors | USB-C, Micro SD x2- for recording redundancy, DC, Micro SIM |
Probe length | 0.5m or 1m |
Housing material | Chemical-resistant nylon |
Mounting | Compatible with DJI Skyport, adaptable to other platforms |
Produkta veids | Koferis |
Kameras veids | Polaroid |