Walimex pro Trigger W1 TTL T-O Wireless Remote Control

Rated 4.2/5 based on 1 customer reviews

tax incl.

This product is currently not available for order, please check later.

13450
4056929217049
Walimex pro

New product

  • Wireless 2.4 GHz radio remote trigger, control for Walimex pro Flash2Go studio battery-powered flash and TTL Light Shooter up to a distance of 100 m
  • Supports TTL automatic flash, flash exposure bracketing, high speed sync, rear curtain sync
  • Remote control of all important flash functions such as output and flash mode (mode: manual, multi, TTL), modelling light, up to 5 groups and 32 channels
  • For Olympus cameras, compatible with, among others, PEN-F, E-P3. E-P5, E-PL5, E-PL6, E-PL7, E-PL8, E-M1, E-M10II and Panasonic cameras like: DMC-G85, DMC-GH4, DMC-GF1, DMC-GX85, DMC-LX100, DMC-FX2500GK
  • W1 TTL radio remote control with large clear display and easy operation; requires 2 x AA batteries – not included


Reliable control and super-fast trigger
The W1 TTL radio remote control is designed for Olympus cameras with a TTL function. You can control flashes that have an inbuilt Walimex pro W1 receiver system (e.g. Light Shooter 360 TTL, Flash2Go 600 TTL) directly by radio (2.4 GHz). The camera with a W1 radio trigger on it controls the exposure automatically in TTL mode without having to make manual adjustments. With the Walimex pro W1 TTL radio trigger, data is sent extremely quickly to the flash or several flashes, and they are adjusted accordingly and triggered with minimal delay. The maximum sync time is 1/8,000 seconds (achievable at a maximum exposure time of the camera of 1/8,000 seconds). If you want somewhat different exposure in TTL mode, the exposure can be adjusted up or down manually by three aperture stops (in third stages). Flash exposure bracketing is also possible. Based on the TTL values, an underexposed, a normally exposed and an overexposed image is created, from which the most suitable can be selected. The W1 TTL T-S radio trigger can control up to 6 flash groups at the same time (with one or several flashes).

Fully automatic or manual settings
Instead of fully automatic TTL exposure, you can control the flash output individually via the W1 radio control. Each flash or flash group can be controlled individually so that even difficult-to-access flashes can be adjusted during the shoot. The radio control supports both manual mode and multi mode (stroboscope function). All relevant parameters such as the number of flashes, frequency and output can be adjusted via the remote control. The maximum supported sync time is 1/8,000 seconds (achievable at a maximum exposure time of the camera of 1/8,000 seconds). Exposure with corresponding front and rear curtain sync shutter speeds can be set.

Intuitive to operate
The radio trigger requires 2 normal AA batteries (not included). A clear display makes it easy to adjust the important parameters. The settings can be made easily and for the most part intuitively. A comprehensive instruction manual (German and English) will help with tricky photo shoots.

Tested camera models
The radio trigger works with the following tested Olympus cameras: PEN-F, E-P3. E-P5, E-PL5, E-PL6, E-PL7, E-PL8, E-M1, E-M10II
Panasonic: DMC-G85, DMC-GH4, DMC-GF1, DMC-GX85, DMC-LX100, DMC-FX2500GK. If your model is not listed, we recommend a self-test and possibly upgrading your USB-firmware.

technical description

W1 TTL T-O
compatible camerasOlympus and Panasonic cameras
supports cameras with PC-sync-connection
built-in remote transmission systemradio 2.4 GHz
modulation operationMSK
power supply2*AA-batteries
exposure
mnual adjustment yesyes
TTL auto flash E-TTLTTL
multiple flashyes
TTL
high-speed synchronizationyes
flash exposure compensationyes, ± 3 in 1/3 increments
flash exposure lockyes
focusing light beamswitch on manually
sync. 2. shutter curtainyes (setting on the camera)
wireless flash
controllable slave groupmax. 5 groups (A/B/C/D/E)
transmission range (approx.)up to 100 m
channels32
other aspects
adjusting the synchronization delayyes (0 ~ 10 ms, unit 100 µs)
acoustic signalON/OFF
ZOOM-settingControl the zoom setting of the flash over
the transmitter
output interfacetransmitter: connect to input and output via
PC-cable
firmware-upgradeupdate via micro USB port
mermory functionsettings are saved for 2 seconds after the
last operation and restored after a reboot
dimensions/weight72x75x52 (mm) / 90 g



General information

Width 75mm
Weight 90g
Height 52mm
Length 72mm

Specifications

Range 10000cm
Transfer Funk

Packaging

Girth 385mm
Height of Packaging 110mm
Length of Packaging 110mm
Weight incl. Packaging 140g
Width of Packaging 55mm
Type of ProductTrigger
CompatibleOlympus
PurposeFor Studio Light
Trigger typeraidītājs

send a message

Quick order


This product is currently not available for order, please check later.