Godox GS200II Studio Flash

Godox GS series is versatile studio flashes with a solid housing and convenient functions, has flash energy adjustment from 1/1 to 1/32 short recycle time while the 150W modeling light has a proportional mode to allow you to preview your lighting effects and a percentage mode that adjusts brightness from 5 to 100%. or just turn off. The built-in System X receiver completes the huge functionality of the lamp.

Godox GS series has a flash energy adjustment range within 5 degrees of aperture (1/1 - 1/32, with an accuracy of 0.1 EV). Recycle time to full flash energy less than 1 seconds. At minimal power, it achieves a very short flash duration of only 1/2000s (t = 0.1), which allows free shooting during the session. The flash color temperature is 5600K with tolerance ± 200K depending on the flash energy set.

The built-in System X receiver enables remote flash firing (until X-Sync), flash energy control and many more. In addition, Godox GS series is equipped with a USB connector that allows you to connect receivers of the XT16, FT-16 or X1 TTL system. It is also possible to use the 3.5 mm Jack socket and connect the lamp with triggers of other brands.

The back panel of the lamp is simple and functional. The LCD screen showing the lamp settings is also easy to read from a large angle. Next to it is a handy knob for adjusting the flash output, changing the radio communication channel and the group of lamps. Placed under the LCD screen a series of five buttons gives quick access to all settings and functions of the lamp. The 150 W halogen pilot light can operate independently of the flash output (brightness can be set manually), or be coupled with flash energy (proportional). In addition, it can be turned off automatically for a flash or stay on without interruption.

With the lamp you can use a wide range of light modifiers, such as: bowls, softboxes, spotlights, beauty disheres, and others are fitted with Bowens accessories.

The set contains:

• Godox GEMINI GS200II lamp
• power cable
• modeling lamp
• flashtube cover
• original packaging

Data sheet

• Fitting type     Bowens
• Power in Ws     200
• Power control     smooth adjustment, system X
• Power adjustment     1 - 1/32
• Triggering     test button, System X, sync cord, optical
• Triggering options     M / S1 / S2 / Slave
• Recycle time in sec     1
• Colour Temperature (K) +/- 200K     5600
• Modeling light     150W
• Flash duration     1/800 - 1/2000
• Groups/Channels     16/32
• Cooling     active
• Display     LCD
• Power Supply     AC 230V 50/60Hz
• Equipment     osłona palnika, kabel zasilający, kabel synchro
• Dimensions in cm     34 x 21.9 x 11.4
• Weight (in kg)     2