StudioKing SKRL10 LED dimmable LED bi-color ring light with table tripod and

The StudioKing Bi-Color LED Ring Lamp Set SKRL10 is a universal vlogger's kit, consisting of a dimmable bi-color LED ring lamp, table tripod and smartphone holder. The set is a handy solution when you want to take photos or videos (of yourself) with a smartphone, where you just want that little bit of extra light and where you want the light to perfectly match the environment.

The ring lamp has 120 small LED lights, which are located under a diffuser. Together they generate a power of 10 Watt. You can set the colour temperature of the LED lamp from 3200K (warm yellow light) to 5600K (daylight), and everything in between. Moreover, you can also determine the power of the lamp yourself. You can immediately see the effect of the LED light in your picture.

The power is supplied via the included micro-USB cable. This allows you to connect the StudioKing SKRL10 to your laptop/computer, for example, or to mains power (mains adapter not included). To take pictures of your smartphone, you can place your mobile phone in the mobile phone holder provided. This is attached to the flexible bar, so that you can put your smartphone in the desired position yourself. The holder is suitable for mobile phones with a width between 53 and 72 mm. At the bottom of the ring light there is a spigot adapter. This allows you to attach the StudioKing lamp to the included table stand. The mechanism on the spigot adapter allows you to rotate the lamp 360 degrees and to tilt it. In conclusion, you can position the lamp, your smartphone and the tripod completely according to your own preference.

Usage StudioKing LED Ring Lamp Set SKRL10

The lamp can be easily attached to the table stand via the standard spigot connection. To use the LED lamp in combination with your smartphone, loosen the rotating ring of the holder. Then press the smartphone holder onto the flexible bar and tighten the ring again. Then you can place your smartphone in the holder.

As soon as you supply power to the ring lamp, it will start up automatically. By means of the right-hand button on the body, you can then set the desired colour temperature; the left-hand knob can be used to determine the output power. Now you are ready to make the perfect recording!

Other specifications

• Min. tripod height: 31 cm
• Max. tripod height: 47.5 cm
• MicroUSB cable length: 150 cm
• Height flexible rod: 13.5 cm

The StudioKing Bi-Color LED Ring Lamp Set SKRL10 is a universal vlogger's kit, consisting of a dimmable bi-color LED ring lamp, table tripod and smartphone holder. The set is a handy solution when you want to take photos or videos (of yourself) with a smartphone, where you just want that little bit of extra light and where you want the light to perfectly match the environment.

The ring lamp has 120 small LED lights, which are located under a diffuser. Together they generate a power of 10 Watt. You can set the colour temperature of the LED lamp from 3200K (warm yellow light) to 5600K (daylight), and everything in between. Moreover, you can also determine the power of the lamp yourself. You can immediately see the effect of the LED light in your picture.

The power is supplied via the included micro-USB cable. This allows you to connect the StudioKing SKRL10 to your laptop/computer, for example, or to mains power (mains adapter not included). To take pictures of your smartphone, you can place your mobile phone in the mobile phone holder provided. This is attached to the flexible bar, so that you can put your smartphone in the desired position yourself. The holder is suitable for mobile phones with a width between 53 and 72 mm. At the bottom of the ring light there is a spigot adapter. This allows you to attach the StudioKing lamp to the included table stand. The mechanism on the spigot adapter allows you to rotate the lamp 360 degrees and to tilt it. In conclusion, you can position the lamp, your smartphone and the tripod completely according to your own preference.

Usage StudioKing LED Ring Lamp Set SKRL10
The lamp can be easily attached to the table stand via the standard spigot connection. To use the LED lamp in combination with your smartphone, loosen the rotating ring of the holder. Then press the smartphone holder onto the flexible bar and tighten the ring again. Then you can place your smartphone in the holder.

As soon as you supply power to the ring lamp, it will start up automatically. By means of the right-hand button on the body, you can then set the desired colour temperature; the left-hand knob can be used to determine the output power. Now you are ready to make the perfect recording!

Included

• StudioKing Bi-Color Dimmable LED Ring Lamp
• Universal spigot adapter with tilting mechanism
• Table tripod (extendable)
• Smartphone holder (compatible with 53–72 mm smartphones)
• Flexible bracket
• MicroUSB charging cable 150 cm
• Full-color packaging