Caligri Airtube Switch 100 KIT

Caligri Airtube Switch 100 KIT

The Airtube Switch 100 is a softbox for tube lights up to 100cm. Alternatively, you can put it on an LED headlight.*

To mount the headlight you need:
a suitable Fresnel attachment
Airtube Switch 100/120 Fresnel Adapter (Item No.: ATS12019H), already included in this kit

Matching Fresnel attachments

• Aputure 2X Fresnel
• Nanlite FL-20
• Prolycht Orion 300
• Fresnel 2x
• and many others

Matching LED headlights

• Kelvin Epic 300
• Aputure 300D/300X
• Amaran 300C
• Prolycht 300FS
• Nanlite Forza 300
• and many more

The following tube lights can be mounted directly

• Amaran T2c
• Astera AX-1
• Astera FP1-BTB Titanium Tube
• 2x Astera FP2 Helios
• Ledgo AltaTube 80C
• PavoTube 15C color effect light

Dimensions when assembled

• Total length 110cm
• translucent part 100cm
• Diameter 19cm

characteristics

• for tube lights with a length of 100cm
• changeable diffuser mats
• Can also be used with headlights, adapter set included
• The lamp is fixed using Velcro strips
• The softbox can be inflated with a standard air pump from a camping retailer (or with your mouth if necessary), max. air pressure 0.83 bar
• Valve opening diameter: 1.75cm / 0.68
• Light cones can be limited using curtains
• Rear light can be covered with an apron
• The softbox, curtains and apron are designed to ensure light controls remain easily accessible
• Made in Germany from proven, high-quality materials (Magic Cloth® and Ultrabounce® from TRP worldwide)

Delivery handling

• Airtube Switch 100
• Diffuser mats, 1x full, half and quarter each
• Curtains, consisting of two parts (for side screening)
• Apron, consisting of two parts (to cover taillight)
• Replacement Velcro strips to fix the tube
• gym bag
• Adapter set for Fresnel attachment
• mechanical hand air pump (free addition)

safety instructions

• If the light is completely covered with curtains and aprons, the ambient temperature is very high and/or the light is running at full power, you should keep an eye on the temperature. It may be necessary to let the lamp cool down a little or to ensure sufficient ventilation.
• The AIRTUBE can withstand temperatures up to 85°C / 185°F
• Maximum air pressure: 12 PSI / 0.83bar . Especially when inflating with a compressor, you should keep an eye on the pressure so that the seams remain intact.
• To protect the Airtube from kinks or other damage, you should carefully roll it up when storing or transporting it. We recommend storing them in the box.

Care tips

• The best way to clean the white, translucent fabric is with warm water and, if necessary, a gentle soap
• It is best to clean the black casing with warm water and common household cleaner