SmallRig BM0003 Handheld kit for Blackmagic BMPCC4K BM0003

SmallRig BM0003 Handheld Kit for Blackmagic BMPCC4K

The SmallRig BM0003 Handheld kit for Blackmagic BMPCC4K consists of the following components:

• SmallRig 2203B Cage
• SmallRig 2343 Universal Holder for External SSD
• SmallRig 2246B HDMI & USB C Cable Clamp
• SmallRig 2247 Lens Mount Adapter Support
• SmallRig 2299 Sunhood
• SmallRig 2187 Wooden NATO Side Handle
• SmallRig 1955 Action Stabilizing NATO Handle
• SmallRig 1960 Cold Shoe
• SmallRig 2323 Quick Release Clamp
• SmallRig 2279 15mm Single Rod Clamp
• SmallRig 1050 2pcs 15mm Black Aluminium Alloy Rod

SmallRig 2203B Cage for Blackmagic Design Pocket Cinema Camera 4K 6K

The cage is securely locked to the camera by 1/4 20 screws on the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles and scratches. It features NATO rails on the top and left side, multiple 1/4 20 & 3/8 16 threaded holes, and ARRI locating holes.

SmallRig 2343 Universal Holder for External SSD

This spring-loaded clamp is stretchable on both sides, fitting different SSDs. It comes with a detachable cold shoe which can be fixed on the bottom or side of the holder. The holder features soft protective rubber pads inside, keeping the SSD securely in the clamp and preventing scratches.

SmallRig 2246B HDMI & USB C Cable Clamp for BMPCC 4K & 6K (New Version)

The clamp attaches to the side of the cage with two 1/4 20 knob screws, securing both the HDMI and USB C cable by tightening two sliding blocks. The clamp prevents the cables from being accidentally pulled out.

SmallRig 2247 Lens Mount Adapter Support for BMPCC 4K

It mounts to the cage by two M4 screws and locks the lens adapter by one 1/4 screw. It supports the lens adapter, relieves pressure from heavy lenses, and prevents loss of signal.

SmallRig 2299 Sunhood for BMPCC 4K

The SmallRig 2299 Sunhood for BMPCC 4K helps provide a great viewing experience in harsh lighting environments. The hood part is foldable for storage and transport. There are 1/4 20 and 3/8 16 screw holes on the top of the frame where you can mount accessories.

SmallRig 2187 Wooden NATO Side Handle

The SmallRig 2187 Wooden NATO Side Handle is designed to provide comfortable handheld shooting for cameramen. It is locked via NATO clamp to make your setup quick release and fits any cage featuring NATO rail on the side.

SmallRig 1955 Camera / Camcorder Action Stabilizing NATO Handle

The SmallRig 1955 Action Stabilizing NATO Handle is a sliding top handle for moving shoots. It is designed for quick release attach and detach on the camera without screws. You can slide it from left to right on the rail to keep your camera balanced, and also slide it forwards and backwards to find the balance point of your rigs.

SmallRig 1960 Cold Shoe

The SmallRig Cold Shoe 1960 comes with two 1/4 holes for accessories. Two arrowheads point to the built-in bump, which secures accessories well. Additionally, a certain space is kept in 1/4 holes between the nut and hot shoe, so that hot shoe contacts are protected.

SmallRig 2323 Quick Release Clamp for Nucleus Nano Hand Wheel Controller

The SmallRig 2323 Quick Release Clamp for Nucleus Nano Hand Wheel Controller is designed for attaching the handwheel controller to gimbals and any other camera equipment with 1/4 20, 3/8 16, and M4 threaded holes. The adapter is anti-off designed to prevent the handwheel from accidentally sliding off.

SmallRig 2279 15mm Single Rod Clamp for BMPCC 4K Cage

The SmallRig 2279 15mm Single Rod Clamp for BMPCC 4K Cage is a low profile rod clamp. It is attached to the bottom left corner of the cage by two 1/4 screws. By holding a 15mm rod firmly, follow focus motors like Tilta Nucleus Nano, PD MOVIE, and REDROCK can be attached to your camera rig.

SmallRig 1050 2pcs 15mm Black Aluminium Alloy Rod (M12 15cm) 6inch

This set of 2 SmallRig 1050 15mm Aluminium Rods lets you add accessories to your rig. The aluminium rods are 6 inches long, lightweight, and strong enough to support all your accessories! At both ends, the rods have an M12 thread for attaching an extra rod.

Warranty

2 year warranty

Additional Features

• SmallRig 2203B Cage: A dedicated full cage with a form-fitting design and unobstructed battery & SD card access.
• SmallRig 2343 Universal Holder: Mounts to the camera rig by the cold shoe or 1/4 20 screws, weighs 115 grams.
• SmallRig 2246B HDMI & USB C Cable Clamp: Included hex spanner can be applied to tighten the screw.
• SmallRig 2247 Lens Mount Adapter Support: Works with 3 Metabones and Viltrox EF M2 Lens Mount Adapters.
• SmallRig 2299 Sunhood: A dedicated sun hood designed for BMPCC 4K & 6K, the leather hood clips into the square frame conveniently.
• SmallRig 2187 Wooden NATO Side Handle: Built-in Allen wrench allows you to change the direction of the handle and adjust the height; 1/4 & 3/8 threaded holes & cold shoe on top of the handle for accessory attachment.
• SmallRig 1955 Camera / Camcorder Action Stabilizing NATO Handle: 1/4 20 & 3/8 16 mounting points for additional accessories and ARRI locating hole for attaching ARRI compatible extension blocks; comes with a 1/4 spanner for quick use.
• SmallRig 1960 Cold Shoe: Screws to lock firmly.
• SmallRig 2323 Quick Release Clamp: Quick release lever and installation mark; provides multiple mounting points such as 1/4 20, 3/8 16, and M4 holes.
• SmallRig 2279 15mm Single Rod Clamp: 15mm single rod clamp designed to mount a follow focus motor.
• SmallRig 1050 2pcs 15mm Black Aluminium Alloy Rod: Made of carbon fiber, lightweight and durable.

Included Components

• 1 x SmallRig 2203B Cage for Blackmagic Design Pocket Cinema Camera 4K 6K
• 1 x SmallRig 2343 Universal Holder for External SSD
• 1 x SmallRig 2246B HDMI & USB C Cable Clamp for BMPCC 4K & 6K (New Version)
• 1 x SmallRig 2247 Lens Mount Adapter Support for BMPCC 4K
• 1 x SmallRig 2299 Sunhood for BMPCC 4K
• 1 x SmallRig 2187 Wooden NATO Side Handle
• 1 x SmallRig 1955 Camera / Camcorder Action Stabilizing NATO Handle
• 1 x SmallRig 1960 Cold Shoe
• 1 x SmallRig 2323 Quick Release Clamp for Nucleus Nano Hand Wheel Controller
• 1 x SmallRig 2279 15mm Single Rod Clamp for BMPCC 4K Cage
• 1 x SmallRig 1050 2pcs 15mm Black Aluminium Alloy Rod (M12 15cm) 6inch