JJC Wireless Remote Control 30m JM-B(II) (Nikon MC-30)
The JJC JM-B(II) Wireless Remote Control is designed for Nikon DSLRs with an external connection for a remote control. It operates at a frequency of 433MHz and has 16 channels. Because the remote control uses a radio frequency, there are no obstacles such as trees, walls and bushes, and you can trigger your camera from up to 30 metres away. The JM-II receiver is attached to the hotshoe of your camera and connected to the camera with the supplied cable.
Versatile and easy to use
The JM-II transmitter can trigger your camera's shutter button in five ways: single shot, five second delay, three continuous shots, unlimited continuous shots and bulb. You can even use the transmitter in combination with multiple receivers. The receiver has a 1/4"-20 connection on the bottom so that you can also place it on a tripod. It is also possible to use the receiver as a wired remote control. Press the button on the receiver halfway to focus and press it fully to take a picture. Wired triggering works even when the battery in the receiver is flat or missing. The included curling cable has a minimum length of 26 centimetres and a maximum length of approximately 60 centimetres. Two LEDs on the receiver indicate the pre-focus and exposure in wireless mode.
Characteristics
Operating frequency: 433Mhz
Number of channels: 16
Operating distance up to approximately thirty metres
The receiver has a 1/4" screw thread at the bottom