JJC Wireless Remote Control 30m JM-D II (Panasonic DMW-RS1)

Rated 4.4/5 based on 1 customer reviews

4245 tax incl.

Pre-order. Delivery time from 3 weeks.

1135
JM D
6950291503312
JJC

New product

Delivery Instore
possibly after 09.01.2025
Pickup in store
Free
Delivery Postbox
possibly after 08.01.2025
Postbox (Omniva, DPD, Venipak)
from 3 €
Delivery
possibly after 08.01.2025
Courier (Omniva, DPD)
from 10 €
Delivery Bycicle
possibly after 09.01.2025
Bike delivery (in Riga only)
from 7 €

Info

JJC Wireless Remote Control 30m JM-D II (Panasonic DMW-RS1)
The JJC JM-D(II) Wireless Remote Control is designed for Panasonic and Leica cameras with an external connection for a remote control. The system operates at a frequency of 433MHz and has 16 channels available. Because the remote control uses a radio frequency, there are no obstacles such as trees, walls and bushes and you can trigger your camera up to a distance of thirty metres. The JM-II receiver is attached to the hotshoe of your camera and connected to the camera with the supplied cable. 

Versatile and easy to use
The JM-II transmitter can trigger your camera's shutter button in five ways: single shot, five second delay, three continuous shots, unlimited continuous shots and bulb. You can even use the transmitter in combination with multiple receivers. The receiver has a 1/4"-20 connection on the bottom so that you can also place it on a tripod. It is also possible to use the receiver as a wired remote control. Press the button on the receiver halfway to focus and press it fully to take a picture. The wired remote control works even when the battery in the receiver is empty or missing. The included curling cable has a minimum length of 26 centimetres and a maximum length of approximately 60 centimetres. Two LEDs on the receiver indicate the pre-focus and exposure in wireless mode.

Characteristics

  • Number of channels: 16
  • Operating frequency: 433Mhz
  • Operating distance up to approximately 30 metres
  • The receiver has a 1/4" screw thread at the bottom
  • The receiver uses one 3 V CR2 battery
  • The transmitter uses one 12 V 23A battery
  • Dimensions transmitter: 82x27x15mm
  • Weight of the transmitter: 18 grams
  • Dimensions receiver: 48x38x29mm
  • Receiver weight: 19 grams
  • 2 Year warranty 

In the box

  • 1 x CR2 battery
  • 1 x 23A battery
  • 1 x Connection cable for the receiver
  • 1 x User's manual

Type of ProductRemote control devices

send a message

Quick order


This product is no longer in stock