Walimex pro Audioadapter 107

Rated 3.9/5 based on 1 customer reviews

tax incl.

This product is currently not available for order, please check later.

28230
21031
4056929210316
Walimex

New product

Discover related products

Discover related products

Audioadapter 107
  • 2 channel XLR adapter with pre-amplifier and phantom power
  • ideal of all DSLRs with an integrated microphone socket
  • The audio adapter is attached to the camera via a 1/4 inch thread

The walimex pro audio adapter is a 2 channel XLR adapter with pre-amplifier and phantom power. Ideal of all DSLR cameras with an integrated microphone socket A display shows optical monitoring of the sound recording. There is also a wide range of settings to optimise the sound quality. The audio adapter can be attached simply from below via a 1/4 inch thread to the camera.

Functions
LCD Display: Level status display in dB
GAIN switch: Signal amplifier, low to high +20dB
PEAK switch: On/off switch of the LED signal displays. LEDs flash red in the event of overload
Monitor PLAY/REC switch: Play for headset - playback of camera audio signals. REC for headset - recording of audio signals during recording
AGC on/off switch: when activated (on), the output level of the camera is kept constant. Note: Function only possible with AGC cameras. Read the manual for your camera to learn more about this.
M/S switch: to select mono (M) or stereo (S) output mode
POWER switch: On/off switch
PHANTOM 12 V/48 V switch. For 12 or 48V condenser microphones. Note: Most microphones use 12 V. Read the manual for your microphone to learn more about this.
LINE/MIC/PH switch
LINE mode is for amplifiers and other audio devices with a line output. The signal is reduced to approx. 40dB
MIC mode is for self-powered microphones
PH (phantom) mode is for microphones with a pH value that require a phantom setting.

 

Input2 x XLR input, symmetrical
 
Output1 x 3.5 mm audio output
 1 x headset output
Input signalMIC: 0 dB at -44 dBu Input
 LINE: 0 dB at +10 dBu Input
Output signalNormal mic levels
Frequency range20 Hz - 20 kHz (+/-0.5 dB)
THDless than 0.01 % at 1 kHz, -30 dBu Input
S/N85 dB at 1 kHz, -30 dBu Input
GAINLO gain: 0 dB
 Hi gain: 20 dB
Phantom power12 or 48 V / 14 mA
Level Meter-18 dB to +3 dB in 3dB steps
Battery1 x 9 V block battery (3 hours without phantom power)
Weight599 g
Size (L x W x H)155 x 98 x 64 mm
  • 1 x Audio adapter
  • 1 x User manual
  • 1 x Jack-jack cable 3.5mm
  • 1 x Jack-cinch cable
Accessories for microphonesAdapteri

send a message

Quick order


This product is currently not available for order, please check later.