Boya Deadcat Windshield BY-B04 for BY-PVM1000L

Overview
Thank you for purchasing the high-end PIXEL product. This product is using for off-camera to control the flash gun. Its makes the flashgun to be more flexible operates as difference angle.
Please read and understand this instruction manual completely and make sure work well on the flashgun before use this product.
Cautions
1 Make sure the camera and flash are powered off before use.
2 This is an electronic products accessory; some of the environment causes may affect the
working. However this is hardly ever to get this situation, don‘t worry
3 When connect the cable with the device,do not pull the wires.
4 This product can‘t be strong vibration, or may lead to product failure.
5 Keep dry, do not uses wet hand contact with the product, the product must not be immersed
in water or exposed to rain, this may lead to not work properly.
6 Do not put it in high temperature, such as a closed car under direct sunlight, the control panel
and other high-temperature areas.
7 Do not use flammable gases in violation of this warning may cause an explosion or fire.
Included Items:
Please check the below items in the package, please contact to dealer if there is missed some items.
Off-camera adaptor (camera side) 1pc
Off-camera adaptor (flash side) 1pc
Off-camera connecting cable
1pc
Instruction manual
1pc

The Boya Deadcat BY-B04 is suitable for the Boya BY-PVM1000L. The Deadcat is made of artificial fur and specially designed to reduce wind noise when recording outdoors or in adverse environmental conditions.

Usage BY-B04

You can use the Deadcat as windshield for your audio equipment. Because of the special inner lining you reduce the wind noise, but you’ll keep the acoustic sound. The BY-B04 is equipped with an elastic cord so it’ll fit at almost every audio recorder. It has a grey mixed color.  The wind cap has an inner diameter of Ø 1.9 - 2.3 cm and is 24 cm deep. So all microphones of this size are suitable.